Seafarer documentsPositions

Chief Engineer: duties, certificates and career path

  • Engine Department
  • Full article
  • Checked 6 October 2026
Department
Engine Department
Qualification document
2 options, by ship III/2
Contents7

1 What the job involves

The chief engineer is the senior engineer officer responsible for the mechanical propulsion and the operation and maintenance of the ship's mechanical and electrical installations. The chief engineer works at the management level, ensures, in consultation with the master, watchkeeping arrangements adequate for a safe engineering watch, and determines in advance the voyage needs for fuel, water, lubricants, chemicals, spare parts, tools and supplies.43,44

Marine engineering at the management level. Manage the operation of propulsion plant machinery; plan and schedule operations to suit the design parameters of the plant and the requirements of the voyage; operation, surveillance, performance assessment and maintaining safety of propulsion plant and auxiliary machinery; manage fuel, lubrication and ballast operations.45

Electrical, electronic and control engineering at the management level. Manage the operation of electrical and electronic control equipment; manage trouble-shooting and restoration of that equipment to operating condition.46

Maintenance and repair at the management level. Manage safe and effective maintenance and repair procedures; detect and identify the cause of machinery malfunctions and correct faults; ensure safe working practices.47

Controlling the operation of the ship and care for persons on board at the management level. Control trim, stability and stress; monitor and control compliance with legislation on safety of life at sea, security and protection of the marine environment; maintain the safety and security of the vessel, crew and passengers and the readiness of life-saving, fire-fighting and other safety systems; emergency and damage control plans and handling emergencies; leadership and managerial skills.48

How work is usually shared (practice, not a rule)

In many companies the chief engineer does not keep an engine-room watch: the chief assigns machinery and work to the engineers, runs planned maintenance, and is responsible for spare parts and fuel requests, reports to the company and the engine room's readiness for inspections.

2 Qualification document

The qualification document depends on the ship: 2 options below.1,2

Qualification document

one of these, depending on the ship

3 Documents and training

The set of documents depends on the ship, the flag and your duties. Each document shows when it is needed: if the condition does not apply to your ship, you may not need it. The final list for a voyage is set by the employer and the flag State. This covers ships to which the STCW Convention and MLC 2006 apply.

Everyone on board

Bridge or engine-room watch

part of the training for the certificate or shown by a separate certificate

Depending on ship equipment

Depending on ship type and area

5 more

Depending on assigned duties

2 more

Serving under another flag

If the employer requires

set by the employer or industry, not by the conventions
  • Offshore travel and emergency training39
    Work on or travel to an offshore installation, as the employer requires
  • Employer-specified English language test40–42
    The employer requires an English test

4 Career path

The sea service below is the STCW minimum: the regulations it comes from are titled "mandatory minimum requirements", and the Code sets out minimum standards that every issuing Party must maintain.49,50

The steps show the certificates for propulsion power of 3,000 kW or more; for 750–3,000 kW there are separate second and chief engineer certificates under Regulation III/3, with the sea service given in the step conditions.55

MoreLess

5 Validity and revalidation

The certificate is revalidated at intervals of no more than five years. You need medical fitness and proof of continued professional competence, in one of these ways: sea service in the capacity of the certificate, at least 12 months in the last five years or 3 months in the six months before revalidation; functions accepted as equivalent; an approved test; approved courses; or three months as a supernumerary or in a lower officer rank immediately before taking up the rank of the certificate.56–58

For tankers, competence is proved separately every five years: 3 months of tanker service in the last five years or an approved course.59,60

2 more

On ships subject to the IGF Code (gases or other low-flashpoint fuels), engineer officers must hold a certificate in advanced training for such ships. Holders of basic and advanced IGF certificates undertake refresher training, or show the required competence within the previous five years, at intervals of no more than five years.61

A medical certificate is valid for no more than two years, or one year under the age of 18. Evidence of maintained competence in basic training (personal survival, fire fighting), survival craft and rescue boats, and advanced fire fighting is required every five years.62,63

6 Names in other countries

How these certificates are named in other countries.

Certificate of Competency – Chief Engineer Officer, 3,000 kW or more (III/2)

Certificate of Competency – Chief Engineer Officer, 750–3,000 kW (III/3)

Show all 45 countries

Certificate of Competency – Chief Engineer Officer, 3,000 kW or more (III/2)

Certificate of Competency – Chief Engineer Officer, 750–3,000 kW (III/3)

7 Frequently asked questions

How much sea time do I need to become a chief engineer?

For 3,000 kW or more: at least 36 months of approved sea service as engineer officer; this may be reduced to 24 months if at least 12 of them were as second engineer. For 750–3,000 kW: at least 24 months, of which at least 12 while qualified to serve as second engineer.54

Can a second engineer with a 3,000 kW certificate serve as chief engineer on a ship of less than 3,000 kW?

Yes, if the certificate is endorsed for it: an engineer qualified as second engineer for 3,000 kW or more may serve as chief engineer on ships of less than 3,000 kW when the certificate is so endorsed.64

What certificates does a Chief Engineer need?

Qualification document, depending on the ship: Certificate of Competency – Chief Engineer Officer, 3,000 kW or more or Certificate of Competency – Chief Engineer Officer, 750–3,000 kW. Everyone on board: Seafarer Medical Fitness Certificate; Basic Safety Training; Security Awareness Training. For a bridge or engine-room watch: Leadership and Managerial Skills – Management Level; Engine-Room Resource Management Training; Professional English for shipboard duties. 17 more documents depend on the equipment, the ship type and the duties. When each one is required and how long it is valid is shown in the table and under Documents and training.1,2

Can I serve as chief engineer under another flag?

Yes, if the flag State has recognized your certificate and issued an endorsement attesting recognition. For management-level certificates, the flag makes sure you know its maritime legislation relevant to your functions. Until the endorsement is issued, the flag may allow you to serve for up to three months, provided it already recognizes certificates of the country that issued yours and you have proof that the application has been submitted.65