Seafarer documentsPositions

Motorman-Welder: certificates and documents

  • Engine Department
  • Full article
  • Checked 1 October 2026
Department
Engine Department
Qualification document
No single international document
Contents6

1 What the job involves

A motorman-welder combines the work of a motorman and a welder; the STCW Convention sets no separate certificate for this position. Requirements depend on the actual duties: an engine-room watch rating certificate under Regulation III/4 for forming part of an engineering watch or duties in a periodically unmanned engine-room on a ship of 750 kW or more, and a certificate under Regulation III/5 for service as able seafarer engine. There is no international certificate for welding: for support-level functions without tables of competence, the Administration determines the training.29,30

Marine engineering at the support level. For a rating forming part of an engineering watch, Table A-III/4 requires the ability to carry out a watch routine appropriate to a rating forming part of an engine-room watch; understand orders and be understood on watch matters; on a boiler watch, maintain the correct water levels and steam pressures; operate emergency equipment and apply emergency procedures: escape routes from machinery spaces, location and use of fire-fighting equipment.31

Repairs in the engine room. Repairs to electrical, mechanical, hydraulic, pneumatic or electronic equipment are carried out with the knowledge of the engineer officer of the watch and the chief engineer and are recorded. The engineer officer of the watch is responsible for isolating and bypassing the machinery being worked on, and engine-room ratings doing maintenance must be available to help with manual operation if automatic equipment fails.32

Maintenance and repair at the support level. If the motorman-welder serves as able seafarer engine, that capacity on ships of 750 kW or more requires a certificate under Regulation III/5. For it the Code includes in maintenance and repair the use of hand and power tools, measuring instruments and machine tools, and metalwork.33,34

Safety on board. Before being assigned shipboard duties, everyone working on board receives safety familiarization: alarm signals, muster and embarkation stations, escape routes, lifejackets, action on fire and man overboard. Seafarers with designated safety or pollution-prevention duties complete basic training before starting work: personal survival techniques, fire prevention and fire fighting, elementary first aid, personal safety and social responsibilities. On a ship required to comply with the ISPS Code, everyone also receives security-related familiarization before being assigned shipboard duties, and crew members without designated security duties complete security-awareness training.35–38

How work is usually shared (practice, not a rule)

A motorman-welder keeps an engine-room watch or does day work in the engine crew and carries out welding as directed by the second engineer. Hot work is done under a permit, following company procedures. Employers often ask for proof of welder qualification, for example a welder qualification test certificate to ISO 9606-1.

2 Qualification

There is no single international qualification document for this position: the flag State and the employer set the qualification. The documents below depend on the ship and the duties.1

3 Documents and training

The set of documents depends on the ship, the flag and your duties. Each document shows when it is needed: if the condition does not apply to your ship, you may not need it. The final list for a voyage is set by the employer and the flag State. This covers ships to which the STCW Convention and MLC 2006 apply.

Everyone on board

Depending on ship type and area

Depending on assigned duties

If the employer requires

set by the employer or industry, not by the conventions
  • Employer-specified English language test24–26
    The employer requires an English test
  • Welder qualification for the specified process27,28
    The employer requires a welder qualification

4 Career path

The sea service below is the STCW minimum: the regulations it comes from are titled "mandatory minimum requirements", and the Code sets out minimum standards that every issuing Party must maintain.39,40

5 Validity and revalidation

STCW does not require ratings' certificates to be revalidated: revalidation under Regulation I/11 applies to masters, officers and radio operators, and Table B-I/2 of the Code shows no revalidation for ratings. If your certificate shows an expiry date, go by that date.44,45

A medical certificate is valid for no more than two years, or one year under the age of 18. Evidence of maintained competence in basic training (personal survival, fire fighting) and, if you hold them, in survival craft and rescue boats and advanced fire fighting is required every five years.46–48

6 Frequently asked questions

Does a motorman-welder need a certificate?

There is no separate motorman-welder certificate. One who forms part of an engineering watch or is designated to perform duties in a periodically unmanned engine-room on a ship of 750 kW or more needs an engine-room watch rating certificate; one who serves as able seafarer engine needs that certificate. Regulation III/4 exempts ratings under training and those whose duties are of an unskilled nature.29

How much sea time do I need for an engine-room watch rating certificate?

A minimum age of 16 and approved sea service including at least 6 months of training and experience, or special training ashore or on board including at least 2 months of approved sea service. The service must be linked to engine-room watchkeeping under the direct supervision of a qualified engineer officer or a qualified rating.41

Who isolates machinery before repair work?

The engineer officer of the watch is responsible for isolating, bypassing and adjusting the machinery to be worked on and records all work carried out. The chief engineer informs the officer of the watch of all maintenance and repair work to be done during the watch, and detailed repairs are done with the knowledge of both and recorded.49

What certificates does a Motorman-Welder need?

There is no single international qualification document for this position. Everyone on board: Seafarer Medical Fitness Certificate; Basic Safety Training; Security Awareness Training. 8 more documents depend on the equipment, the ship type and the duties. When each one is required and how long it is valid is shown in the table and under Documents and training.1