Seafarer documentsPositions

AB-Welder: certificates and documents

  • Deck Department
  • Full article
  • Checked 1 October 2026
Department
Deck Department
Qualification document
No single international document
Contents6

1 What the job involves

An AB-welder is a deck rating who also does welding. The STCW Convention sets no separate certificate for this position. Requirements depend on the actual duties: a watch rating certificate for navigational watchkeeping on a ship of 500 GT or more, a certificate under Regulation II/5 for service as able seafarer deck, and Chapter VI certificates according to designated duties. The STCW Convention has no welder certificate: for support-level functions without tables of competence, the Administration determines the training, assessment and certification.25,26

Controlling the operation of the ship and care for persons on board at the support level. For an able seafarer deck the Code covers the safe operation of deck equipment and machinery, including bosun's chairs, pilot ladders and gangways; occupational health and safety precautions: working aloft, over the side and in enclosed spaces, permit-to-work systems; preventing pollution of the marine environment; and operating survival craft and rescue boats.27

Maintenance and repair at the support level. For an able seafarer deck the Code covers contributing to maintenance and repair: painting, lubrication and cleaning, surface preparation, hand and power tools, and safe disposal of waste.28

Safety on board. Before being assigned shipboard duties, everyone working on board receives safety familiarization: alarm signals, muster and embarkation stations, escape routes, lifejackets, action on fire and man overboard. Seafarers with designated safety or pollution-prevention duties complete basic training before starting work: personal survival techniques, fire prevention and fire fighting, elementary first aid, personal safety and social responsibilities. On a ship required to comply with the ISPS Code, everyone also receives security-related familiarization before being assigned shipboard duties, and crew members without designated security duties complete security-awareness training.29–32

How work is usually shared (practice, not a rule)

An AB-welder works in the deck crew under the bosun and the chief mate and does welding on deck and on the hull: repairs to railings, ladders and fittings and minor repairs to hull structures. Hot work is done under a permit, following company procedures. Employers often ask for proof of welder qualification, for example a welder qualification test certificate to ISO 9606-1.

2 Qualification

There is no single international qualification document for this position: the flag State and the employer set the qualification. The documents below depend on the ship and the duties.1

3 Documents and training

The set of documents depends on the ship, the flag and your duties. Each document shows when it is needed: if the condition does not apply to your ship, you may not need it. The final list for a voyage is set by the employer and the flag State. This covers ships to which the STCW Convention and MLC 2006 apply.

Everyone on board

Depending on ship type and area

Depending on assigned duties

If the employer requires

set by the employer or industry, not by the conventions
  • Employer-specified English language test20–22
    The employer requires an English test
  • Welder qualification for the specified process23,24
    The employer requires a welder qualification

4 Career path

The sea service below is the STCW minimum: the regulations it comes from are titled "mandatory minimum requirements", and the Code sets out minimum standards that every issuing Party must maintain.33,34

5 Validity and revalidation

STCW does not require ratings' certificates to be revalidated: revalidation under Regulation I/11 applies to masters, officers and radio operators, and Table B-I/2 of the Code shows no revalidation for ratings. If your certificate shows an expiry date, go by that date.38,39

A medical certificate is valid for no more than two years, or one year under the age of 18. Evidence of maintained competence in basic training (personal survival, fire fighting) and, if you hold them, in survival craft and rescue boats and advanced fire fighting is required every five years.40–42

6 Frequently asked questions

Is there an international welder certificate for seafarers?

Not under the STCW Convention: its list of certificates and documentary evidence has none. Where the Code has no tables of competence for certain functions at the support level, the Administration determines the training, assessment and certification; under MLC 2006 a seafarer must be trained or certified as competent or otherwise qualified for the duties. Check with the employer which welder qualification will be accepted.43–45

How much sea time do I need for an able seafarer deck certificate?

After you qualify as a watch rating: at least 18 months of approved sea service in the deck department, or at least 12 months plus approved training.46

Does an AB-welder need basic safety training?

Everyone receives safety familiarization before being assigned shipboard duties, and seafarers with designated safety or pollution-prevention duties also complete basic training. Under MLC 2006 no one may work on board without personal safety training.30,47

What certificates does an AB-Welder need?

There is no single international qualification document for this position. Everyone on board: Seafarer Medical Fitness Certificate; Basic Safety Training; Security Awareness Training. 6 more documents depend on the equipment, the ship type and the duties. When each one is required and how long it is valid is shown in the table and under Documents and training.1