Fitter-Welder: duties, certificates and career path
- Engine Department
- Full article
- Checked 1 October 2026
- Department
- Engine Department
- Qualification document
- No single international document
Contents6
1 What the job involves
The STCW Convention sets no separate fitter-welder certificate: this is an engine-room rating. Where the Code has no tables of competence for support-level functions, the flag State Administration determines the training, assessment and certification of the personnel who perform them. Under MLC 2006 a seafarer may work on board only if trained or certified as competent or otherwise qualified for the duties.25,26
Repairs in the engine room. Repairs to electrical, mechanical, hydraulic, pneumatic or electronic equipment are carried out with the knowledge of the engineer officer of the watch and the chief engineer and are recorded. The engineer officer of the watch is responsible for isolating and bypassing the machinery being worked on, and engine-room ratings doing maintenance must be available to help with manual operation if automatic equipment fails.27
Maintenance and repair at the support level. If the fitter-welder serves as able seafarer engine, that capacity on ships of 750 kW or more requires a certificate under Regulation III/5. For it the Code includes in maintenance and repair the use of hand and power tools, measuring instruments and machine tools, and metalwork.28,29
Safety on board. Before being assigned shipboard duties, everyone working on board receives safety familiarization: alarm signals, muster and embarkation stations, escape routes, lifejackets, action on fire and man overboard. Seafarers with designated safety or pollution-prevention duties complete basic training before starting work: personal survival techniques, fire prevention and fire fighting, elementary first aid, personal safety and social responsibilities. On a ship required to comply with the ISPS Code, everyone also receives security-related familiarization before being assigned shipboard duties, and crew members without designated security duties complete security-awareness training.30–33
How work is usually shared (practice, not a rule)
A fitter-welder usually works in the engine crew under the second engineer: making and repairing parts, welding, pipe repairs. Hot work is done under a permit, following company procedures.
2 Qualification
There is no single international qualification document for this position: the flag State and the employer set the qualification. The documents below depend on the ship and the duties.1
3 Documents and training
The set of documents depends on the ship, the flag and your duties. Each document shows when it is needed: if the condition does not apply to your ship, you may not need it. The final list for a voyage is set by the employer and the flag State. This covers ships to which the STCW Convention and MLC 2006 apply.
Everyone on board
- Seafarer Medical Fitness Certificate2,3I/9
- Basic Safety Training4–6VI/1Assigned safety or pollution-prevention duties
- Shipboard Safety Familiarisation7A-VI/1.1
- Security Awareness Training8,9VI/6The ISPS Code applies to the ship; crew member without designated security duties
Depending on ship type and area
- Basic Training – Oil and Chemical Tanker Cargo Operations10–12V/1-1Oil tanker or chemical tanker; assigned duties related to cargo or cargo equipment
- Basic Training – Liquefied Gas Tanker Cargo Operations11–13V/1-2Liquefied gas tanker; assigned duties related to cargo or cargo equipment
- Basic Training for Service on Ships Subject to the IGF Code14–16V/3The ship is subject to the IGF Code; assigned safety duties related to fuel
Depending on assigned duties
- Passenger Ship Crowd Management Training17–19V/2.7Passenger ship; assigned to assist passengers in emergencies
4 Career path
The sea service below is the STCW minimum: the regulations it comes from are titled "mandatory minimum requirements", and the Code sets out minimum standards that every issuing Party must maintain.34,35
| Step | Document | Condition |
|---|---|---|
| Fitter-Welder | The STCW Convention sets no separate fitter or welder certificate; a seafarer must be trained or qualified for the duties.26,36 | |
| Engineer Officer of the Watch | At least 18 years old; workshop skills training plus 12 months of approved sea service in a programme with a training record book, or 36 months of sea service with at least 30 in the engine department; at least 6 months of engine-room watchkeeping under the supervision of the chief engineer or a qualified engineer officer; approved education and training to Section A-III/1; basic training, survival craft and rescue boats, advanced fire fighting and medical first aid.37 MoreLess |
5 Validity and revalidation
A medical certificate is valid for no more than two years, or one year under the age of 18; a colour vision certification for no more than six years.38
If you hold basic safety training, evidence of maintained competence in personal survival and fire fighting is required every five years.39,40
6 Frequently asked questions
Is there an international fitter-welder certificate?
Who isolates machinery before repair work?
The engineer officer of the watch is responsible for isolating, bypassing and adjusting the machinery to be worked on and records all work carried out. The chief engineer informs the officer of the watch of all maintenance and repair work to be done during the watch, and detailed repairs are done with the knowledge of both and recorded.42
Can I become an engineer officer of the watch through sea service, without a maritime college?
Under STCW you need workshop skills training and at least 36 months of approved sea service, of which at least 30 in the engine department, at least 6 months of engine-room watchkeeping under the supervision of the chief engineer or a qualified engineer officer, approved education and training to Section A-III/1, the Chapter VI training listed in Regulation III/1, and a minimum age of 18. These are minimums: the issuing country may require more.35,43
What certificates does a Fitter-Welder need?
There is no single international qualification document for this position. Everyone on board: Seafarer Medical Fitness Certificate; Basic Safety Training; Security Awareness Training. 6 more documents depend on the equipment, the ship type and the duties. When each one is required and how long it is valid is shown in the table and under Documents and training.1
| Document | When required | Validity | Rule |
|---|---|---|---|
| Seafarer Medical Fitness Certificate | Always | By the certificate, at most 2 years | I/9 |
| Basic Safety Training | Assigned safety or pollution-prevention duties | As issued; competence shown every 5 years | VI/1 |
| Security Awareness Training | The ISPS Code applies to the ship; crew member without designated security duties | As shown on the issued document | VI/6 |
| Basic Training – Oil and Chemical Tanker Cargo Operations | Oil tanker or chemical tanker; assigned duties related to cargo or cargo equipment | As issued; competence shown every 5 years | V/1-1 |
