Seafarer documentsPositions

Rigger: certificates and documents

  • Deck Department
  • Full article
  • Checked 1 October 2026
Department
Deck Department
Qualification document
No single international document
Contents6

1 What the job involves

A rigger prepares and checks lifting accessories and rigging, slings loads and gives signals during lifting operations. The STCW Convention sets no separate rigger certificate. Where the Code has no tables of competence for certain functions at the support level, the Administration determines the training, assessment and certification of the personnel who perform them, and under MLC 2006 a seafarer may work on board only if trained or certified as competent or otherwise qualified for the duties.16–18

Ropes, chains and rigging. For an able seafarer deck the Code covers fibre and wire ropes, cables and chains, including their construction, use, markings, maintenance and proper stowage; basic signals for operating cranes and hoists; and the proper use of blocks and tackle and the handling of lines, wires, cables and chains.19

Controlling the operation of the ship and care for persons on board at the support level. For an able seafarer deck the Code covers the safe operation of deck equipment and machinery, including bosun's chairs, pilot ladders and gangways; occupational health and safety precautions: working aloft, over the side and in enclosed spaces, permit-to-work systems; preventing pollution of the marine environment; and operating survival craft and rescue boats.20

Safety on board. Before being assigned shipboard duties, everyone working on board receives safety familiarization: alarm signals, muster and embarkation stations, escape routes, lifejackets, action on fire and man overboard. Seafarers with designated safety or pollution-prevention duties complete basic training before starting work: personal survival techniques, fire prevention and fire fighting, elementary first aid, personal safety and social responsibilities. On a ship required to comply with the ISPS Code, everyone also receives security-related familiarization before being assigned shipboard duties, and crew members without designated security duties complete security-awareness training.21–24

How work is usually shared (practice, not a rule)

Riggers mostly work on offshore vessels and floating units, crane and construction vessels: they prepare slings and lifting accessories, check their markings and condition, direct slinging and signal to the crane operator. Offshore, employers usually ask for training to an industry standard, for example OPITO standards for riggers and for banksmen and slingers.

2 Qualification

There is no single international qualification document for this position: the flag State and the employer set the qualification. The documents below depend on the ship and the duties.1

3 Documents and training

The set of documents depends on the ship, the flag and your duties. Each document shows when it is needed: if the condition does not apply to your ship, you may not need it. The final list for a voyage is set by the employer and the flag State. This covers ships to which the STCW Convention and MLC 2006 apply.

Everyone on board

If the employer requires

set by the employer or industry, not by the conventions
  • Offshore travel and emergency training10
    Work on or travel to an offshore installation, as the employer requires
  • Employer-specified English language test11–13
    The employer requires an English test
  • Crane qualification for the specified equipment and operations14,15
    The employer requires a crane qualification

4 Career path

The sea service below is the STCW minimum: the regulations it comes from are titled "mandatory minimum requirements", and the Code sets out minimum standards that every issuing Party must maintain.25,26

5 Validity and revalidation

A medical certificate is valid for no more than two years, or one year under the age of 18; a colour vision certification for no more than six years.30

If you hold basic safety training, evidence of maintained competence in personal survival and fire fighting is required every five years.31,32

6 Frequently asked questions

Is there an international rigger certificate?

Not under the STCW Convention: its list of certificates and documentary evidence has none. Where the Code has no tables of competence for certain functions at the support level, the Administration determines the training, assessment and certification; under MLC 2006 a seafarer must be trained or certified as competent or otherwise qualified for the duties. Check with the employer which rigger qualification will be accepted.16,18,33

What does the able seafarer deck standard say about rigging?

Fibre and wire ropes, cables and chains, including their construction, use, markings, maintenance and stowage; basic signals for operating cranes and hoists; the proper use of blocks and tackle and handling of lines, wires, cables and chains; knots, splices and stoppers. This is part of the able seafarer deck standard, not a rigger qualification.19

Does a rigger need basic safety training?

Everyone receives safety familiarization before being assigned shipboard duties, and seafarers with designated safety or pollution-prevention duties also complete basic training. Under MLC 2006 no one may work on board without personal safety training.22,34

What certificates does a Rigger need?

There is no single international qualification document for this position. Everyone on board: Seafarer Medical Fitness Certificate; Basic Safety Training; Security Awareness Training. The employer may also require Offshore travel and emergency training; an English language test; Crane qualification for the specified equipment and operations: this is the employer's condition, not a convention requirement. When each one is required and how long it is valid is shown in the table and under Documents and training.1